http://totalwall.com//images/total_slider/21.jpghttp://totalwall.com//images/total_slider/Apt.jpghttp://totalwall.com//images/total_slider/Apt2.jpghttp://totalwall.com//images/total_slider/BaySHoreTowersFL.jpghttp://totalwall.com//images/total_slider/FairfieldWeatherfordTX.jpghttp://totalwall.com//images/total_slider/HolidayInnBellmead.jpghttp://totalwall.com//images/total_slider/IMG_2993.jpghttp://totalwall.com//images/total_slider/IMG_3000.jpghttp://totalwall.com//images/total_slider/IMG_4747.jpghttp://totalwall.com//images/total_slider/IMG_4789.jpghttp://totalwall.com//images/total_slider/IMG_4796.jpghttp://totalwall.com//images/total_slider/P1010016.jpghttp://totalwall.com//images/total_slider/PurpleCowHotSprings.jpghttp://totalwall.com//images/total_slider/brown.jpghttp://totalwall.com//images/total_slider/calleparque3.jpghttp://totalwall.com//images/total_slider/ncalleparque6.jpghttp://totalwall.com//images/total_slider/pab.jpghttp://totalwall.com//images/total_slider/slide-1.jpghttp://totalwall.com//images/total_slider/tcalleparque20.jpg

Total Direct ICF

Total Direct ICF

Non-bearing exterior cladding for commercial and residential structures constructed of polystyrene insulated concrete forms. This system is used to weatherproof, protect and beautify any ICF structure.

  • Lightweight and will not stress the design of the structure.
  • Relatively low cost yet highly durable cladding.
  • Cladding will provide impact resistance, ultraviolet protection and weather protection to the polystyrene ICF surface.
  • Takes advantage of the "mass effect" of the structure
  • Easily accessorized with architectural enhancements
  • Practically any combination of color or texture can be achieved

Applicable Substrates

ICF Substrate Manufacturers: Reward Wall, Arxx, Polysteel, Dow Chemical, Keeva, Owens Corning, BuildBlock, Amvic, EcoBlock, Others as approved in writing by Total Wall Inc.

Limitations: Application by Total Wall, Inc. approved applicators only.

Application: Temperature must be maintained at or above 40 degrees Fahrenheit.

Freshly applied products must be protected from precipitation.

Downloads

SYSTEM SUMMARY
PDF
SPEC DATA
PDF
DETAILS
PDF
FORM SPECIFICATION
PDF